Phosphate buffer solution pH 2.8
Dissolve 7.8 g of sodium dihydrogen phosphate in 900 mL of water, adjust to pH 2.8 with phosphoric acid and dilute to 1000 mL with the same solvent.
You may also like this
SOP for testing and release of In-process and Finished product in pharmaceuticals
SOP for testing and release of In-process and Finished product in pharmaceuticals
1.0 Purpose:
Preparation of Iron Standard Solutions
Preparation of Iron Standard Solutions
Iron Standard Solution (0.1% Fe):
Dissolve
0.100 g of Fe in
SOP for handling of Out of Calibration (OOC) results in pharmaceutical
SOP for handling of Out of Calibration (OOC) results.
1.0 Purpose:
To lay down a procedure- Preparation of Silver standard solution (5 ppm Ag)
Preparation of Silver standard solution (5 ppm Ag)
Silver standard solution (5 ppm Ag):
Dilut
SOP for Out of Specification (OOS) test results
SOP for Investigation of Out of Specification (OOS) test results.
1.0 Objective :
To lay down 
Preparation of Ferricyanide Standard Solution
Preparation of Ferricyanide Standard Solution
Ferricyanide Standard Solution (50 ppm Fe(CN)6):&
Emoticon Emoticon